Sony cameras require some one-time settings configuration to work well with Arsenal. These instructions vary by camera model. Below are the instructions for each Sony camera we support today.
Troubleshooting tip: if you receive an error when connecting, double check that your camera is set to "USB Connection,” not "Mass Storage.”
Instructions for Sony A7iii and A7Riii
Follow the steps in this video for A7iii and A7Riii cameras. You'll use the USB cable provided with your Arsenal for these cameras. For these cameras you will want to plug the USB into your camera’s “multi” port.
Instructions for 1st and 2nd generation Sony Cameras
Follow these instructions for models A5000, A5100, A6000, A6300, A6500, A7, A7r, A7s, A7ii, A7Rii, A7Sii
Arsenal controls these Sony cameras via the "Sony PlayMemories Smart Remote" app over WiFi.
To configure this connection, follow the steps in this video:
Additional note: If you have two-factor authentication enabled on your Sony Entertainment, you'll need to disable this setting:
- Visit the Sony Account Management site
- Go to the Account tab and select Security
- In the 2-Step Verification section, select Edit next to Status and choose "Deactivate"
After the first time setup and connection, Arsenal will remember your camera's network name and password and connect as soon as it sees the network.
Reminder: You will need to start the Sony PlayMemories Smart Remote app on your camera each time you want to connect to Arsenal.